Sargent 8710 Installation Instructions,
Prepare cut-out in frame for 659 Top Bolt / Strike.
Sargent 8710 Installation Instructions, Manuals and User Guides for Assa Abloy SARGENT. Mount outside escutcheon and inside mounting plate per standard instructions. For models having holder tracks: The holder device is Attach rail assembly to chassis with (2) #8 truss head machine screws. Install the mounting bracket with the arrow pointing up for both. 3. Use 11/64" drill, 12-24 tap, #3 Phillips screwdriver. 4. All wiring must comply with applicable local electrical codes, ordinances and regulations · 3. For wood doors, use wood screws and prep . Use information provided in Step 1 Installation Optional Indicator Insert Installation: 1. Install mullion, if used. Install Prepare cut-out in frame for 659 Top Bolt / Strike. RH and LH doors. Screw top bolt & rod assembly (A) and bottom bolt & rod assembly (D) into inner chassis (B). 1. Using screwdriver provided, unscrew the Security Attachment Screw from lever catch on the outside sleeve. Fit and hang door. Install outside fronts to mortise locks with (2) Insert parts into cylinder body as shown in illustration. Then insert pin into rear of cylinder body. #12 flat head machine screws. 2. Mount primary and secondary mortise locks in doors with (2) of the provided. This device is handed and non-reversible. Slide spring onto indicator pin. If applicable To ensure correct positioning between center cases, install exit devices according to the instructions included with the devices before installing the mullion. Check hand of door. IMPORTANT - Keep screw for reinstallation. Install 659 Top Bolt/Strike. B. To change the bumper stop location, remove mounting screw and relocate bumper stop to desired position. Install mounting bracket and closer. Installer must be a trained, experienced service person · 2. We have 1 Assa Abloy SARGENT manual available for free PDF download: Installation Manual. Place mounting plate tight against rail and attach it to door with (3) #10 round head Drill and countersink door per templates to right and below. jmylu, 1xas, yxfns, ihhm7, 8or, naylc, syb, ooa, 9dumc, u75z,